How To Install

PRIVATE PLATES INSTRUCTION MANUAL

  1. Take everything out of the box including the plates and unwrap everything.
  2. You will need to be in your car to start so go ahead and open your trunk and place everything inside.
  3. Locate your fuse box, every car is different so just watch a YouTube video to find where yours is.
  4. Once you have located it you will have to make sure your car is turned off and you will have to find the fuse that reads “Always On” or “Constant Power”, if you can’t find this look in your car manual book. And if you don’t have that you will need a circuit tester and find the constant fuses. The fuses that light up with your tester are the correct ones you are looking for.
  5. Next you will locate the wiring we have provided you with. There will be two: one wire will be red and one will be black.
  6. You will connect the black wiring with black (ground) on your car battery and red with red (positive) on your car battery.
  7. (Or use the fuse box, plug in the positive (red wire) into the “Always On” or “Constant Power” fuse and find a ground (sort of metal))
  8. We already provide you with locks and a receiver and everything you will need so you won’t have to go out of your way to look for and purchase these items. (You may need extension wiring in order to wire it from the front of your car to the back)
  9. Connect the receiver box to the extension wires coming out of the plate, (we recommend wiring through your trunk handle or just trunk. Try to tuck it in and it will stay discreet and safe).
  10. Once you have done all of this you are done, the remote works from all sorts of distance and of course from inside of the car.



VIDEO IS AVAILABLE ON OUR SOCIAL MEDIAS AND WEBSITE:

https://www.tiktok.com/@private.plates/video/7244602089270267179?is_from_webapp=1&sender_device=pc&web_id=7249470567207470635

WEBSITE: Privateplates.shop

TIKTOK: @stock_535, @private.plates

INSTAGRAM: @_privateplates_